Aller au menu Aller au contenu
Microelectronics, electromagnetism, photonics , microwave

> Events > Events-PhD_Defenses

PhD Defense of PHAN Hong Phuong

Published on October 23, 2018
A+Augmenter la taille du texteA-Réduire la taille du texteImprimer le documentEnvoyer cette page par mail cet article Facebook Twitter Linked In
November 15, 2018 | Access map
Defense of the doctoral thesis of  PHAN Hong Phuongfor the University Grenoble    Alpes , speciality  "OPTICS & RADIOFREQUENCIES ", entitled:
Amphi Z103 - Building Z 1st floor / Phelma/Minatec
3 rue parvis Louis Néel
38016 Grenoble cedex1

" Design of 2D and 3D Antennas on Flexible Substrates "

Hong Phuong PHAN

Hong Phuong PHAN

Thursday, November, 15th,  2018 at 10h


The thesis was carried out within the ANR project « Stick’It » that aimed at developing new, low-cost and innovative technologies devoted to the design of 2D, 2,5D and 3D radiofrequency (RF) components including antennas printed on conformable materials. The targeted applications are primarily home-networking devices such as set-top boxes where their forms and dimensions are widely varied. Therefore, it is necessary to design antennas on flexible substrates.
According to our needs for a substrate material that is flexible, low cost, with good RF properties, recycling ability, and especially ability to make 3D structures, after considering various dielectric materials for flexible electronics, paper substrate appeared to be the most suitable for our purpose.
The work of this thesis conducted in three phases.
       In the first phase, it was the study of methods for characterization of materials to obtain their electromagnetic properties. After analysis, the method of perturbation using a cylindrical cavity was chosen for characterization of paper. The first results of this process were verified by realization and testing of simple antennas such as CPW-fed monopoles on paper and PET. Then, the measurement of E4D paper substrate was performed with 50 samples cut from various E4D paper sheets of three different thicknesses, 104 µm, 210 µm and 387 µm. The results were analyzed statistically and gave Er = 3.184, tand = 0.092.The dispersions of the results measured at 2.5 GHz are 0.25% for Er and 0.26% for tand. These results were used for the next phase.
      In the second phase, different antennas were designed on 0.104-mm and 0.21-mm thick E4D paper including IFAs, SIW cavity-back antenna and microstrip-fed wideband monopole antennas. The prototypes were realized using screen printing technique and tested for matching property and radiation patterns.
      In the third phase the proposed antennas were studied in realistic package conditions, where a set-top box was made of ABS plastic with different dimensions. The first case was with two MIMO antennas orthogonally located in different ABS boxes with sufficient space, so that both of them can remain flat. The second case was a box with a restricted height, so that at least one of the antennas needs to be bent.
Thus, a study of bending effect was carried out, first of all, with a simple straight dipole and a straight monopole on E4D paper, then with a wideband antenna proposed in the second phase. The study showed, that bending does not much affect the matching of the antenna over a wide frequency band. However, its radiation patterns rotate in the E-plane with a rotation angle depending on the bending location and bending angle.
Then, the MIMO system of two antennas placed orthogonally in an ABS box with restricted height so that one antenna needed to be bent and another remained flat. In all cases of MIMO antenna system, we obtained good isolation (>20 dB) and Envelope Correlation Coefficient (ECC) less than 0.05.

 Jury members :
  • Tan Phu VUONG - Supervisor
  • Philippe BENECH - Cosupervisor
  • Fabien FERRERO - Reviewer
  • Valérie VIGNERAS - Reviewer
  • Delphine BECHEVET - Examiner
  • Dominique LO HINE TONG - Examiner
  • Christian PERSON - Examiner
  • Pascal XAVIER - Examiner
  • Delphine BECHEVET - Examiner

A+Augmenter la taille du texteA-Réduire la taille du texteImprimer le documentEnvoyer cette page par mail cet article Facebook Twitter Linked In


Thesis prepared in the laboratory : UMR 5130 - IMEP-LAHC -UMR 5130 - Institut de Microélectronique, Electromagnétisme et Photonique - LAboratoire d'Hyperfréquences et de Caractérisation, supervised by  Tan Phu VUONG, supervisor and Philippe BENECH Cosupervisor.

Date of update October 23, 2018

Grenoble site
Grenoble INP - Minatec : 3, Parvis Louis Néel - CS 50257 - 38016 Grenoble Cedex 1

Chambery site
Université Savoie Mont Blanc - Rue Lac de la Thuile, Bat. 21 - 73370 Le Bourget du Lac
République Française         Logo CNRS_2019        Logo Grenoble INP - UGA   Grenoble Alps University    Université Savoie Mont Blanc
Université Grenoble Alpes